LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 6, 2016 22:40:00 GMT -8
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 6, 2016 22:39:21 GMT -8
Hi John,
Here a few reported XRF as XLX but they are not XLX reflectors :
XRF003 XRF112 DMR+ master XRF150 DMR+ master XRF350 DMR+ master XRF550 DMR+ master XRF988 DMR+ master
73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 6, 2016 22:32:47 GMT -8
Hi John,
Maybe it's time to clean up a little bit in your directory.
Here the non working links down for more than a week and + :
XRF007 XRF029 XRF036 XRF069 XRF074 XRF112 XRF150 XRF222 XRF318 XRF336 XRF350 XRF550 XRF678 XRF704 XRF719 XRF860 XRF988
73, Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 2, 2016 9:41:55 GMT -8
Hi Fred,
Just link your DMR to TG4350 (DMR+) and you will be on XLX270 D, or link to DCS270 D and you will come out on TG4350 (DMR+)
73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Jun 21, 2016 7:52:51 GMT -8
Hello John, Could you please add XRF404(XLX404) to your list. 1. URL to a working dashboard: bendiksverden.net/2. hosting organization: Hosted by Bendik Iversen (LB1BI). XLX multiprotocol reflector. 3. country: Norway Thank you very much. 73 de Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on May 26, 2016 6:12:03 GMT -8
Hi,
Because you did not activate the calling home feature in the config.inc.php of the XLX Dashboard. Set this parameter from false to true and the thumb will go up :-)
$CallingHome['Active'] = true; // xlx phone home, true or false
73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on May 4, 2016 2:54:57 GMT -8
Hi guys, The dashboard v2.3.1 is online can be pulled from the github. This version is a major release, introducing the interlink visualization. After installing, the dashboard is collecting your interlinks and pushing them into the xlxapi server database. The interlink visualization page can be accessed under the following url: xlxapi.rlx.lu/adminI'm still working on the design, :-) In a first stage it is only a visualization, so you can see your existing interlinks and the webpage will make a propose for missing links. In the future it will be possible to setup your interlinks directly via the webpage. If you are using interlinks, it is important that you install the dashboard as fast as possible to populate the database. Be careful, your config.inc.php will be replaced by the new version. So after installing, review all you settings and change the config.inc.php on your needs. Especial if your hash file is located on a different path as the default /tmp. Please try to not loosing your hash file. If you installed the XLX Core on a different location as the default, please change the path to your xlxd.interlink in the config.inc.php. Have fun - Luc -
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on May 1, 2016 23:47:40 GMT -8
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 28, 2016 1:24:56 GMT -8
Hi guys,
XLX v1.3.7 is online and can be pulled from the github.
fixes: - corrected a problem with DPlus disconnect acknowledgment - corrected a problem with dxrfd disconnect acknowledgment
Notice: You do not need to reboot the server, just pull the source, stop the xlxd service, make, make clean, make install. Don't override your xlxd.interlink and start the xlxd service. If you think you need to reboot the server. please don't loose your personal hash. It's a good idea to use a safe path for your callinghome.php rather than the /tmp folder which can be defined in the config.inc.php since dashboard v 2.3.0.
Have fun - Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 23, 2016 2:28:51 GMT -8
New XRF032
1) Required: the URL to a working dashboard: xlx032.epf.lu/db/
2) Required: the address to be added to the hostfile as well as the dashboard URL - ADDED: xrf032.epf.lu
3) Required: the hosting or sponsoring station or organization: Hosted by Radioamateurs du Luxembourg, contact: dvc@rlx.lu.
4) Required: the country: Luxembourg
5) Optional: the organization website if it exists: www.rlx.lu
6) Optional: any title or other description for the reflector: XLX multiprotocol reflector.
7) Optional: the city and/or region: n/a
In fact for the comment, you can make a copy past from xrf270. Thank you John. 73, Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 18, 2016 6:24:34 GMT -8
Hi guys,
XLX v1.3.6 is online and can be pulled from the github.
fixes: - corrected problem with DCS disconnect acknowledgment - now refuse linking to non-implemented modules
changes: - 8 modules by default - changed XLX interlink timeouts
Dashboard:
Add flag and support for Northern Ireland.
Have fun - Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 8, 2016 0:10:40 GMT -8
Hi John,
Thank you for the fast action.
73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 7, 2016 18:52:25 GMT -8
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Mar 23, 2016 23:23:19 GMT -8
I'm sorry but xlx is still not operational then I restored xrf930 with dashboard xreflector.ddns.net/xrf930.html. please restore thank you. 73 iz7kys Claudio Hi Claudio, What is the problem ? Maybe I can help you ? 73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Mar 23, 2016 5:22:41 GMT -8
Hi,
The old database in the yahoo group was deleted two days ago. Have a look at the conf.inc.php situated in the ./pgs. I think the config.inc.php is self explained. Just be aware that you put the new URL to XLXAPI server into the config file, which is: $CallingHome['ServerURL'] = 'http://xlxapi.rlx.lu/api.php'; //database server, do not change !!!!
By the way, what is the XLX number you are using?
73, Luc
|
|