f4eed
New Member
Posts: 2
|
Post by f4eed on Aug 3, 2016 0:08:01 GMT -8
Hi Luc,
thanks i test this ...
73, Fred
|
|
|
Post by iw8eln on Aug 16, 2016 8:45:46 GMT -8
Hi Luc, I'm IW8ELN Roberto(sysop XLX113). My reflector is reported NOT OK by the system. MyIPis always the same(XX.XX.154.173), the system was OK but after restarting my PC my XLX113 is not OK. Everything works too but is reported as damaged in the reflector list. What is the method to restore OK indication in the reflector list? Thank you. 73 de IW8ELN Roberto
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 16, 2016 23:38:45 GMT -8
Hi Roberto,
You are rebooting your server very often and most of the time you are losing your hash file. Read the latest installation doc please. If you still have trouble with the XLX, feel free to leave me a note.
73, - Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Aug 16, 2016 23:39:01 GMT -8
Hi Folks,
XLX v1.3.8 is out and can be pulled from the git !
XLX Core v1.3.8;
- DPlus, add DV Header every 21 frames. - XLX, now supports DynDNS. - DCS, bugfix, the last frame was not encoded as a last frame.
XLX Dashboard v2.3.1:
- peers.php, hyperlink removed from the IP tap. Hyperlink added to the XLX Peer tap with live check against the xlxapi server.
Have fun - Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Sept 3, 2016 23:04:21 GMT -8
Hi Folks,
XLX v1.3.9 is out and can be pulled from the git !
XLX Core v1.3.9 : - Now supports module restrictions for emergency use.
For correct setup, please refer to the Working principal of the XLX Gatekeeper documentation which can be found in the file section !
Have fun - Luc - LX1IQ
|
|
n8usk
New Member
Posts: 3
|
Post by n8usk on Sept 30, 2016 12:18:57 GMT -8
Any updates on DMR support? I'd love to run a reflector that can do DMR.. or both DMR and D-star
|
|
|
Post by K6KD on Oct 4, 2016 11:59:52 GMT -8
Any updates on DMR support? I'd love to run a reflector that can do DMR.. or both DMR and D-star There was a question and response in the Yahoo Group, xlxd-star. 73 John K6KD
|
|
f4gdl
New Member
Posts: 4
|
Post by f4gdl on Oct 24, 2016 14:44:15 GMT -8
Hi Luc. I try to run XLXD and I bizzare bug: when connecting with ircddbgateway of G4KLX, the gateway is automatically disconnected and then reconnects and repeatedly. Have you ever encountered this kind of bug? it bothers me because I want baucoup change DXRF 3.08 (which works well) for XLXD PS: I have the same bug with DXRF 3.11 Thank you very much. M: 2016-10-24 10:08:00 p.m.: Dextra link to XRF067 A Has Failed (poll inactivity) M: 2016-10-24 10:08:00 p.m.: Dextra link to XRF067 A Has Failed, relinking M: 2016-10-24 10:08:01 p.m.: Dextra ACK received from XRF067 A M: 2016-10-24 10:08:01 p.m.: Dextra link to XRF067 A Established --------------- Je tente de faire fonctionner XLXD, et j'ai bug bizarre : lors de la connexion avec ircddbgateway de G4KLX, la gateway se déconnecte automatiquement puis se reconnecte et ce en boucle. Avez vous déjà rencontré ce type de bug ? cela m’embête beaucoup car je souhaite changer de DXRF 3.08 (qui fonctionne bien) pour XLXD PS: j'ai le même bug avec DXRF 3.11 Merci beaucoup. M: 2016-10-24 22:08:00: DExtra link to XRF067 A has failed (poll inactivity) M: 2016-10-24 22:08:00: DExtra link to XRF067 A has failed, relinking M: 2016-10-24 22:08:01: DExtra ACK message received from XRF067 A M: 2016-10-24 22:08:01: DExtra link to XRF067 A established Copyright:The XLX Multiprotocol Gateway Reflector Server is part of the software system for the D-Star Network. The sources are published under GPL Licenses. Description:The system is composed by a server core completely written in C++ and a Dashboard in PHP. XLX is the first and only multiprotocol Reflector system until now and supports all standard D-Star protocols like DCS, Dextra and DPlus fully transparent. The Keynotes are: - Written in C++ heavy object oriented. - Multithread (do the multithread easy expandable). - Bridged multiprotocol, (DCS, DExtra an DPlus). - Polymorph, (if your node is linked on DCSxxx, the Core will be showed as DCS Reflector to your node or Dongle. Same for XRFxxx or REFxxx). - Easy and fast installation on Linux Server (we only use standard libraries). - Runs as a daemon. - No Database is needed, we use live output to an .xml file. - JSON interface. - No DMR-ID nedded. - The Dashboard is completely written in PHP. - Custom Dashboards are possible do to the .xml output file of the core server. - Access control via black and white lists. You can find our Dashboard at XLX270A beta version of live 3D visualization can be viewed at RepNetFor more information’s feel free to contact us at dvc@rlx.lu If you are interesting in our solution please visit our support group @ xlxd-star73, Luc - LX1IQ
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Oct 25, 2016 8:21:45 GMT -8
Hi,
There is no bug in the XLX in conjunction with ircddbgw. XLX005 has more than 100 repeaters and nodes linked to his XLX, most with ircddbgw. I use myself the commander image with ircddbgw an dvap without any problems. I suppose that you made a configuration error in ircddbgw.
Do you have the latest version of ircddbgw?
73, Luc
|
|
f4gdl
New Member
Posts: 4
|
Post by f4gdl on Oct 25, 2016 15:21:18 GMT -8
Hi, There is no bug in the XLX in conjunction with ircddbgw. XLX005 has more than 100 repeaters and nodes linked to his XLX, most with ircddbgw. I use myself the commander image with ircddbgw an dvap without any problems. I suppose that you made a configuration error in ircddbgw. Do you have the latest version of ircddbgw? 73, Luc Hi Luc Yep Lastest ircddbgw, lastest Jessie, try in local lan but same problem ... M: 2016-10-25 23:17:46: DExtra link to XRF067 A has failed (poll inactivity) M: 2016-10-25 23:17:46: DExtra link to XRF067 A has failed, relinking M: 2016-10-25 23:17:46: DExtra ACK message received from XRF067 A M: 2016-10-25 23:17:46: DExtra link to XRF067 A established Can u explain err in ircddbgw cfg ? (i cant see what) thx
|
|
f4gdl
New Member
Posts: 4
|
Post by f4gdl on Oct 30, 2016 9:25:56 GMT -8
Hi, There is no bug in the XLX in conjunction with ircddbgw. XLX005 has more than 100 repeaters and nodes linked to his XLX, most with ircddbgw. I use myself the commander image with ircddbgw an dvap without any problems. I suppose that you made a configuration error in ircddbgw. Do you have the latest version of ircddbgw? 73, Luc You are right, I had a mistake in the name of the reflector in ircddb it works perfectly now Thank you very much at OM i Looking now for peers ^^. 73s Mathieu / F4GDL
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Dec 16, 2016 3:52:31 GMT -8
Hi folks,
The XLX v1.4.0 is now available and can be pulled from the git.
Bug fixes:
- DCS protocol does not send the last frame - Multiple module interlink streams did not work
Improvements:
- Major improvements in the XLX Interlink connection mechanism.
As multiple modul interlink streams works now, be careful with third part connections like BM or XRFD to prevent loops !!
73, Luc
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Jan 24, 2017 1:12:12 GMT -8
Hi folks,
XLX v1.4.1 with Dashboard v2.3.3 is available and can be pulled from the git.
Improvements:
- Add module information’s to the xlxd.xml for all protocols included the interlinks. - The dashboard shows now always the right module in the last heard tab even when the node is not linked any more. - Some cosmetics.
Bug fixes:
- Multiple nodes with the same call signe are now affected always to the right module in the dashboard.
IMPORTANT!! Please use the new dashboard v2.3.3 only together with the new XLX v.1.4.1.
Have fun - Luc -
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Feb 2, 2017 9:11:11 GMT -8
Hi folks,
XLX v1.4.2 with Dashboard v2.3.4 is available and can be pulled from the git.
Improvements:
- Add an active loop detection for all protocols (DCS, DPLus, DExtra and Interlink) - The dashboard has now a filter option which can be enabled or disabled in the config.inc.php
You must use the new config.inc.php ! Have a look at the changes.txt. Please don't loose your hash file while upgrading.
Have fun - Luc -
|
|
LX1IQ
Junior Member
Posts: 55
|
Post by LX1IQ on Apr 13, 2017 9:47:10 GMT -8
Hi folks,
XLX v1.4.3 is out and can be pulled from the git.
Bug reported:
When a client opens a stream on the XLX server with SID=0, a network loop with connected ircddbgw clients is triggered which causes the XLX to crash.
Well we don’t think that’s a bug in the XLX but rather a bug in ircddbgw. Anyway v1.4.3 now ignores streams with SID=0, so the problem should be resolved.
Have fun - Luc -
|
|